Clear The Air News Blog Rotating Header Image

September 16th, 2011:

Euro 5 and Euro 6 standards: reduction of pollutant emissions from light vehicles

http://europa.eu/legislation_summaries/environment/air_pollution/l28186_en.htm

The European Union is introducing stricter limits on pollutant emissions from light road vehicles, particularly for emissions of nitrogen particulates and oxides. The Regulation also includes measures concerning access to information on vehicles and their components and the possibility of introducing tax incentives.

ACT

Regulation (EC) No 715/2007 of the European Parliament and of the Council of 20 June 2007 on type approval of motor vehicles with respect to emissions from light passenger and commercial vehicles (Euro 5 and Euro 6) and on access to vehicle repair and maintenance information.

SUMMARY

In order to limit pollution caused by road vehicles, this Regulation introduces common requirements for emissions from motor vehicles and their specific replacement parts (Euro 5 and Euro 6 standards). It also lays down measures improving access to information on vehicle repairs and promoting the rapid production of vehicles in compliance with the provisions of the Regulation.

SCOPE

The Regulation covers vehicles of categories M1, M2, N1 and N2, with a reference mass not exceeding 2 610 kg. This includes, among others, passenger vehicles, vans, and commercial vehicles intended for the transport of passengers or goods or certain other specific uses (for example ambulances), which should have positive-ignition engines (petrol, natural gas or liquefied petroleum gas (LPG) or compressed ignition (diesel engines).

Apart from the vehicles mentioned above (which are covered de facto by the Regulation), vehicle manufacturers may request that vehicles intended for the transport of passengers or goods with a reference mass of between 2 610 kg and 2 840 kg should also be included.

In order to limit as much as possible the negative impact of road vehicles on the environment and health, the Regulation covers a wide range of pollutant emissions: carbon monoxide (CO), non-methane hydrocarbons and total hydrocarbons, nitrogen oxides (NOx) and particulates (PM). It covers tailpipe emissions, evaporative emissions and crankcase emissions.

EMISSION LIMITS

There are emission limits for each category of pollutant emissions and for the different types of vehicle listed above. These are detailed in Annex I to the Regulation.

Euro 5 standard

Emissions from diesel vehicles:

  • carbon monoxide: 500 mg/km;
  • particulates: 5 mg/km (80% reduction of emissions in comparison to the Euro 4 standard);
  • nitrogen oxides (NOx): 180 mg/km (20% reduction of emissions in comparison to the Euro 4 standard);
  • combined emissions of hydrocarbons and nitrogen oxides: 230 mg/km.

Emissions from petrol vehicles or those running on natural gas or LPG:

  • carbon monoxide: 1 000 mg/km;
  • non-methane hydrocarbons: 68 mg/km;
  • total hydrocarbons: 100 mg/km;
  • nitrogen oxides (NOx): 60 mg/km (25% reduction of emissions in comparison to the Euro 4 standard);
  • particulates (solely for lean burn direct-injection petrol vehicles): 5 mg/km (introduction of a limit that did not exist for the Euro 4 standard).

In the case of vans and other light commercial vehicles intended for goods transport, the Regulation includes three categories of emission limits, depending on the reference mass of the vehicle: under 1 305 kg, between 1 305 kg and 1 760 kg, and over 1 760 kg. The limits that apply to the last of the three categories also apply to goods transport vehicles (category N2).

Euro 6 Standard

All vehicles equipped with a diesel engine will be required to substantially reduce their emissions of nitrogen oxides as soon as the Euro 6 standard enters into force. For example, emissions from cars and other vehicles intended to be used for transport will be capped at 80 mg/km (an additional reduction of more than 50% compared to the Euro 5 standard). Combined emissions of hydrocarbons and nitrogen oxides from diesel vehicles will also be reduced. These will be capped at, for example, 170 mg/km for cars and other vehicles intended to be used for transport.

Implementation of the standards

As soon as the Euro 5 and Euro 6 standards enter into force, Member States must refuse the approval, registration, sale and introduction of vehicles that do not comply with these emission limits. An additional delay of one year is allowed for goods transport vehicles (category N1, classes II and III, and category N2) and vehicles designed to fulfill specific social needs. Time frame:

  • the Euro 5 standard came into force on 1 September 2009 for the approval of vehicles, and shall apply from 1 January 2011 for the registration and sale of new types of cars;
  • the Euro 6 standard will come into force on 1 September 2014 for the approval of vehicles, and from 1 January 2015 for the registration and sale of new types of cars;

Tax incentives granted by Member States and intended to encourage earlier use of the new limits will be authorised if:

  • they apply for all new vehicles available for sale on the market of a Member State, which meet the requirements of this Regulation before their entry into force;
  • they end on the date the new limits come into force;
  • are worth less than the cost, including fitting, of the devices used on any type of motor vehicle in order to guarantee that the values laid down are not exceeded.

OTHER OBLIGATIONS ON MANUFACTURERS

In addition to complying with the emission limits mentioned above, vehicle manufacturers must also ensure that devices fitted to control pollution are able to last for a distance of 160 000 km. In addition, conformity must be checked for a period of 5 years or over a distance of 100 000 km.

The Commission established committees to devise, before 2 July 2008, procedures, tests and specific requirements for the following:

  • tailpipe emissions, including test cycles, low ambient temperature emissions, emissions at idling speed, exhaust gas opacity, and the proper functioning and regeneration of after- treatment systems;
  • evaporative emissions and crankcase emissions;
  • on-board diagnostic systems and the performance of anti-pollution devices while the vehicle is running;
  • durability of anti-pollution devices, replacement parts for emissions control systems, in-service conformity, conformity of production and technical control;
  • carbon dioxide emissions and fuel consumption;
  • hybrid vehicles;
  • extension of approvals and requirements for small manufacturers;
  • requirements for testing equipment;
  • reference fuels, such as petrol, diesel fuel, gas and biofuels;
  • measuring engine power.

Easy and clear access to information on vehicle repair and maintenance is key to guaranteeing free competition on the internal market for information and repair services. To this end, manufacturers must ensure that independent operators have easy, restriction-free and standardised (particularly in terms of compliance with the OASIS standard) access via the internet to information on the repair and upkeep of vehicles, without discrimination in favour of dealerships and official repair workshops. This obligation covers on-board diagnostic systems and their components, diagnostic tools and testing equipment. Charges for accessing such information are permitted if they are reasonable and proportionate.

BACKGROUND

Although the standards for pollutant emissions have been updated since 1 January 2005 (Euro 4 standard), the EU believes that it is necessary to improve them further, while also considering the implications for the markets and the competitiveness of manufacturers, and the direct and indirect costs for businesses.

This Regulation was drawn up after a wide-ranging consultation with stakeholders. It places the emphasis on reducing emissions of particulates and nitrogen oxides (NOx), particularly for diesel vehicles. It should as a result be possible to achieve marked improvements in health. It should be noted that nitrogen oxides and hydrocarbons are ozone precursors.

Lastly, the Regulation amends Directive 70/156/EEC and Directive 2005/55/EC and will repeal, from 2 January 2013, Directives 70/220/EC, 72/306/EEC, 74/290/EEC, 77/102/EEC, 78/665/EEC, 80/1268/EEC, 83/351/EEC, 88/76/EEC, 88/436/EEC, 89/458/EEC, 91/441/EEC, 93/59/EEC, 94/12/EC, 96/44/EC, 96/69/EC, 98/69/EC, 98/77/EC, 99/100/EC, 99/102/EC, 2001/1/EC, 2001/100/EC, 2002/80/EC, 2003/76/EC and 2004/3/EC.